The AL-10: smart alarm device for constant and transparent monitoring
This alarm controller takes its name from its ten independent alarm groups. Every alarm input has an alarm output linked to it, enabling alarm handling priorities to be programmed. The keys and the corresponding signal LEDs provide you with a straightforward and clear indication of where a problem was detected. The AL-10 communicates the alarm and the corresponding location to either your siren and/or phone output (as selected by you), enabling you to take action as required. The alarm inputs can be switched on/off individually and have a default retard function of 30 minutes. This retard function can be activated if the alarm is reported via your phone. You can also program a dialler delay for every individual input. A key switch is optionally available to prevent unauthorised deactivation of an alarm. The internal battery powers the AL-10 if the mains power is down, thus guaranteeing constant monitoring.
Extra functions when combined with FarmConnect
The AL-10 alarm controller can be controlled remotely when connected to FarmConnect. The ability to assign names to the individual alarm outputs provides extra functionality. You can also view the statuses of the individual alarm messages and, if desired, call up a summary of past messages and/or changes made to the AL-10.
